NSK BA210-10 angular contact ball bearings

rs min:1.1 mm; Fatigue limit load, Cu:6.2 kN; Brand:NTN; Mass (without HJ ring):0.5 kg; Characteristic inner ring frequency, BPFI:8.56 Hz; Static load, C0:51 kN; Radial clearance class:C3; r1s min:1.1 mm; Minimum Buy Quantity:N/A; Weight / Kilogram:0.476;

Recommended tightening torque for set screw:3.7 Nm; Weight:0.27 kg; B1:43.5 mm; B:34 mm; T max.:100 °C; T min.:-20 °C; SW:3.18 mm; m:5 mm; C1:4.4 mm; G:1/4-28UNF;

Brand:NTN; Dynamic load, C:12.8 kN; Max operating temperature, Tmax:110 °C; Characteristic inner ring frequency, BPFI:4.92 Hz; D:47 mm; Characteristic cage frequency, FTF:0.38 Hz; f0:13.2; Min operating temperature, Tmin:-25 °C; Characteristic outer ring frequency, BPF0:3.08 Hz; Nlim (grease):10,000

Nlim (grease):4,000 rpm; d:80 mm; D:140 mm; Da max:131 mm; e:0.16; da min:89 mm; Y0:4.1; Dynamic load, C:40 kN; rs min:2 mm; Max operating temperature, Tmax:120 °C;

H:42.9 mm; s1:15 mm; Recommended tightening torque for set screw:5.5 Nm; B:30 mm; N:14mm; C0:11.2 kN; d:30 mm; S:8 mm; C:19.5 kN; Weight:1.07 kg;

ra max:1 mm; Nlim (grease):12,000 rpm; Characteristic rolling element frequency, BSF:5.95 Hz; Brand:NTN; Da max:57 mm; Mass:0.16 kg; Static load, C0:10.3 kN; Characteristic cage frequency, FTF:0.42 Hz; Max operating temperature, Tmax:110 °C; B:14 mm;

B:49.2 mm; H:53.9 mm; L1:29 mm; N:M12; C0:20.8 kN; G:R1/8"; Designation of open end cover:SCOU209-28; H2:107 mm; L:120 mm; Dz:95 mm;

G:M6x1; N:23mm; Designation of bearing:EX213G2L3; S:34.1 mm; d1:86 mm; d:65 mm; J:210 mm; T max.:100 °C; T min.:-20 °C; e:30 mm;

J:129 mm; A1:30.5 mm; Recommended tightening torque for set screw:8 Nm; B:37.6 mm; Weight:1.71 kg; A:44.5 mm; B1:51.1 mm; N1:21.5 mm; C0:15.2 kN; H1:16 mm;

Accessories:Two Seals & Snap-Rin; Basic Dynamic Radial Load Rating C:66000 N; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:5600 rpm; Basic Static Radial Load Rating Co:76500 N; d:55.000 mm; B:33.30 mm; Sealed Speed Rating n3:4300 rpm; D:100.0000 mm; Grease Speed Rating n1:4300 rpm;

D:240.0000 mm; Fillet Radius ra:2.50 mm; Fillet Radius rb:1.00 mm; B:100.00 mm; Basic Dynamic Radial Load Rating C:416000 N; Grease Speed Rating n1:4800 rpm; Basic Static Radial Load Rating Co:510000 N; d:110.000 mm; Oil Speed Rating n2:7200 rpm;

Brand:NTN; Characteristic cage frequency, FTF:0.42 Hz; Ew:56 mm; b:20.8 mm; Fw:40 mm; Characteristic inner ring frequency, BPFI:7.58 Hz; Bc:20.8 mm; C0r:57 kN; Dw:8 mm; Min operating temperature, Tmin:-20 °C;

C:30 mm; Min operating temperature, Tmin:-20 °C; Dw:7.5 mm; C0r:125 kN; Category:Bearings; Characteristic rolling element frequency, BSF:7.88 Hz; D:85 mm; F:52.5 mm; Minimum Buy Quantity:N/A; Mass:0.88 kg;

e:41.3 mm; d:80 mm; J:153 mm; C:72.5 kN; T max.:200 °C; N:23mm; s1:41.3 mm; B:82.6 mm; S:33.3 mm; G:R1/8";

B:51.6 mm; Recommended tightening torque for set screw:16.8 Nm; C:35.1 kN; L:206 mm; S:19 mm; N1:25 mm; H1:22 mm; L1:65 mm; J:159 mm; H:110 mm;